Experiments Discussions

Simplicity and power of ether

2026-03-08T12:44:01.7030000

This Polish man named Pachuka does incredible things. Watch this video carefully.

https://www.youtube.com/watch?v=Owfs5N_cz5U

He excites the ether with a 9VDC battery and then disconnects it; the circuit becomes self-sufficient, with the ether supplying the voltage to the lamp.

Jagau

Fernando: Donald Smith replication

2026-01-31T19:23:17.8100000

Hello Guys, this is a system base in Donald Smith and other reserchers, but this is my replication guided by youtuber call XR IX,

Resonance energy and Don Smith Proof of Concept

2026-01-10T20:07:54.4130000

To avoid overloading Fughter's thread, I've created another thread on the Don Smith system.

The first experiment will be to verify, with two 60-turn 2.25-inch PVC coils, what one reel can transmit to the other without a transformer effect, using different coil placements like the one he gave as an example often described in his books. Just a transmitter and a receiver coil.

I will build these two coils and will do a practical demonstration.

The text of this experiment we find in D.S book:

Jagau

YoElMiCrO's Ferro-Magnetic Resonance

2024-02-09T00:25:26.3270000

I transferred my thread on Ferro-Magnetic Resonance here to BeyondUnity.org

The Don Smith Effect

2023-05-28T02:54:30.0100000

In order to not interfere with Jagau's experiments with Dr. Stiffler's SEC technology which have many things in common with what Don Smith named "The Don Smith Effect" I'm starting in parallel with Jagau my own experiments with Don Smith's tech.

If this experiment is successful maybe we can unify the technologies these two great teachers demonstrated to us.

So below is my first post in this related thread here.

Fighter

Drag-free motor

2025-12-09T19:06:00.4730000

Drag-free motor
Alex Manzanero has demonstrated a simple way to make a drag-free motor.
Using a coil positioned orthogonally in front of a series of 24 pairs of North-South magnets, he built this motor over a year ago. The goal of this experiment is to avoid having a Lenz drag no matter how you do it.

His YouTube channel:

https://www.youtube.com/@alexmanzanero

Several have tried to replicate this without success, and Alex has demonstrated a real result.

I tried it and it works.
When the coil is placed orthogonally in front of the north-south magnets, it lights up its lamp and produces no drag.

Jagau

Non Linear Resonance

2023-12-14T02:35:21.1030000

I transferred my thread on Non Linear Resonance here to BeyondUnity.org

Non-Inductive Coil Experiment

2025-07-14T04:14:28.9500000

I have tried to replicate the Non-Inductive Coil Experiment. I get similar effects to what Tinker (neale) gets.

For the wave forms, the saw tooth drops down really fast, so it's for like 70%+ of the time. When I increase the frequency from 3k or so to 12-15k the wave form becomes similar to what's shown in video 7.

I do not have something to measure current right now.

Using amcc0320 Proterial

Primary - cw 14awg ,1.628mm. Wound on top of poc1.

Poc1 - cw 20awg, .813mm

Poc2 - ccw 20awg, 0.813

The input are all 5v and the amp shown are the amps on the x-tronic px-70 power supply (linear power supply). The pwm generator is FeelTech fy6300. It is set to 10v ampl and 5v offs square wave (This is to get 0v to 10v square wave pulse). The mosfet used is (IRFP4227PBFXKMA1): https://www.mouser.com/datasheet/2/196/Infineon_IRFI4227_DS_v01_02_EN-1227486.pdf. This has a 21mOhm RdsOn. The signal output from the pwm generator is connected directly to the gate of the mosfet. The primary + is connected directly to the power px-70 power supply. The primary - is connected to the drain of the mosfet. I have a 25v 470uF low impedance capacitor conncted to the priamry + coil and the gnd of the power supply.

One 12v 5w bulb on poc1. Another 12v 5w bulb put on poc2.

I tried to get the peak voltage the same for both poc1, poc2 with the following coils:

22mm wide
primary 7 turns (single layer) (around 13mm wide on top of poc1 about)
poc1 60 (3 layers) turns 21.8mH 1.105uF 0.6ohms
poc2 60 (3 layers) turns 21.8mh 1.138uf 0.6ohms
2800hz 10% 5v .235a poc1: 17.29v peak, 2.33v avg poc2: 17.28v peak, 1.84v avg

22mm wide
primary 7 turns (mutilple layers) (around, 8mm wide on top of poc1 about. I should try to get it closer to 1/4th which is 5.5mm.)
poc1 60 (3 layers) turns 21.8mH
poc2 60 (3 layers) turns 21.8mH
2800hz 10% 5v .238a poc1: 17.77v peak, 2.33v avg poc2: 17.77v peak, 1.74v avg

53mm wide
primary 7 turns
poc1 55 (1 layer) turns 18.28mH
poc2 55 (1 layer) turns 18.33mH
3700hz 10% 5v .195a poc1: 15.4v peak, 1.86v avg poc2: 15.5v peak, 1.57v avg

22mm wide
primary 9 turns
poc1 180 (9 layers) turns 192.5mH
poc2 180 (9 layers) turns 194.0mH
300hz 5% 5v .345a poc1: 18.85v peak, 1.98v avg poc2: 17.36v peak, 1.61v avg

All of these experiments, the sawtooth ended really early (70%+ flat line) before the next pulse.

The lights were mostly the same brightness.

With the 180 turns on the poc, the frequency had to drop really low (300hz), for the peak voltage to be about the same, and the sawtooth ends really fast, so there's a lot of flat time. Also the shorter width coils the frequency had to be lower, for the peak voltage to be the same.

When I raise the frequency, the saw tooth wave form is closer to what tinker and video 7 shows, but poc1 output would increase (4-5v average), and poc2 output would be (200-500mv average).

I am not sure what can be done to get a better sawtooth waveform (going all the way to the next pulse start) and having both poc1 and poc2 output to be close to each other.

I've tried winding primary over both pocs with different number of winds on each poc. I also tried winding the primary over one poc and then switching the direction of the wind before winding over the second poc. The wave forms weren't what was shown in video 7, but I did see in one of the cases both coil would have the same wave sawtooth waveform (like what you get on poc1, where it dips down when pwm rise then spikes up when the pwm falls.) I'm not sure if this is the way to get both pocs to have the same output, but it used a lot more power. One of the combinations of the diodes the output was about the same, the other combinations one was 2x more than the other.

I've tried all 4 combinations of diode direction on both pocs also.

The main thing I want to try and get is to have both pocs have the same output and a good sawtooth waveform (not ending early before next pwm pulse). I might of missed something, but the width of the coil if it's smaller, the magnetic field strength is supposed to increase, which is supposed to increase voltage /current?, but it didn't really increase that much for me with the 60turns (22mm wide, 3 layers) and the 55turns winds (55mm wide, 1 layer). I've tried higher voltages also, but it did not seem to give the result that I wanted (I forgot what the results were). I'm not sure if it's my switching system, but the square wave seemed ok, not super clean. I'll try building the "Quadratron" to see if it makes much of a difference. I think the things that I have left to try is the quadatron, change power supply?, shorten length of wires. Get a better 1/4th width ratio of the primary coil over the secondary. Maybe something is wrong with my core? or try a nanocrystalline core instead of amorphous?

I'll probably try replicating fighter's zpm also, once I understand things more. I've destroyed a 12v sff power supply and a few mosfets so far. I stopped destroying mosfets now, and using the 470uf capacitor the power supply does not go into protection mode? (Clicks and resets back to 5v) anymore and I can increase voltage.

Aharonov-Bohm effect as zero-point energy concentrator

2022-05-23T23:21:41.8100000

Hello,

This is the imported thread (from the old aboveunity site) about my experiment investigating the Aharonov-Bohm effect as zero-point energy concentrator:

https://www.youtube.com/watch?v=BxdpaaKLGWU

For references I will keep the original posting date for every imported post.

Note: This thread is public, everyone can see it, even the visitors which are not members here.

For the posts made by former aboveunity members which are not members on our site I'll use a member placeholder named UndisclosedMember.

Regards,

Fighter

Halfbridge circuit observation

2023-11-14T18:26:07.4200000

some time ago i build a halfbridge for doing experiments. the circuit looks like this,,,

i managed to design a scetch for arduino where i can adjust frequency and duty-cycle. the thing looks like this...

i use infineon IRS2304 as gate-driver IC.

when i look into datasheet i can find information about amount of time which is taken by IC to switch ON or OFF.

so it took between 70 and 120ns for IC to turn ON

and it took between 35 and 60ns to turn OFF

---

today i did some experiments where i use this halfbridge and on oscilloscope screen you can find output from halfbridge on CH4 under load.

now as we can see, the RiseTime and FallTime of the output from halfbridge is incredibly fast compared to the data given by datasheet for gate-driver.

on CH2 we can see the Gate-Signal from highside-FET and CH3 represents Gate-signal from lowside-FET.

CH1 is Resonance-Signal from secondary coil-system which should be not relevant for the input situation.

at the moment i cannot understand, why the output signal has such sharp edges.

hopy some electronic-experts can help me understand better.

regards

Ferrite at Work

2023-12-16T23:55:51.1100000

I transferred my thread on Ferrite at Work here to BeyondUnity.org

Quartz Crystal - High Voltage

2024-08-15T16:55:43.5630000

Hi folks
I left on this idea a little provoked by Joel's Peg cell. I was thinking about his reasoning when he started building this little Peg named source to break the dipole. I think he managed to get this cell with a very high internal resistance(I hope I'm not wrong about that) I took the information more on the fly, without documenting the information very well.
So I thought of a simpler variant which is the one I'll show you right away.
I sincerely hope I can have time to develop this attempt which constructively is completely different from the Peg cell, but would have the same goal. I repeat... I hope I'm not wrong in my judgment. It can also be an interesting topic to approach. We will see...

Your browser does not support the video tag.

Good day to all. realco.

Magnetic field viewing with non magnetic material

2024-05-15T10:02:23.0700000

Hello, here a very interesting experiment where graphite is used to make the magnetic force field visible. Pay attention to the concentration of particles at the place where the magnets are sticking together. Would be nice to make the inverse test with two repelling magnets pressed together, if the field disappears like Floyd Sweet shown in a video with a TV screen as field viewer.

https://www.youtube.com/watch?v=CncGLXxG3ZE

BTG research

2022-08-03T06:26:37.2000000

Hello Friends, I will import this thread; from the backup forum to the public category ,it is dedicated to the BTG devices like the ones shown by Ruslan and Akula. The Goal is to gain knowledge about the involved principals, and hopefully to achieve a working, self-feeding machine. Regarding the tier2 category , I want you to know that I was really tented to post for general public, and certainly the thread will be moved in the replications category when the time is right. But I also know that various persons got in serious troubles , and likely a young man lost his live, because this is the kind of devices produced in series would sensibly cut in the profits of the big energy companies.

We will in a first step go in diakoptik manner thru the different parts of the device and make different kinds of experiments and tests to get basic understanding of how this devices are working, and the interaction of the different parts. Also we will collect information from various sources from the original Builders. I would encourage those of you , who are interested in following or participating in this project, to read the thread about longitudinal waves , as this describes one of the basic physical principals involved in this device.

The First Part of the device we will cover is the push-pull converter. It's function is pumping charges, an analogy would be the electron-gun in the CRT, it is the source of charges. There is no magic in this part, it is just common EM technology, there are different topologies which could be used, half or full bridge would be suitable. For low frequency devices like the Kapagen also an of the shelf silicone steel transformer could be used. It is important that the output is AC. In the research we will stick to the push-pull topology for the ease of switching the two low side IGBT's. Here some images from testing this stage:

As I have time ,Ill continue to upload content and updates or corrections.

Costinbuc's Ideas and Experiments

2024-01-21T12:45:34.2100000

I'm starting this thread to present my miscellaneous ideas and experiments.

Charging 12V Battery with 6 V Transformer

2023-12-21T16:19:37.7900000

Charging 12V Battery with 6 V Transformer by using ACG Bridge from Milan Mančić inventor of this thenologies

https://www.youtube.com/watch?v=n0WZJs14OiM&t=0s

A great experience to try during the holiday season. And it works very well.

Jagau

How to turn a BLDC motor the easy way

2023-12-12T15:45:01.3970000

This is for everyone who wants to turn a BLDC motor without special controller.

Beside the motor you need 5 main components. Mosfet, Zener-Diode, HV/HF-Diode, 100W bulp and a Resistor. You will also need a DC-Source.

The circuit look like this...

To make this work you have to make sure, that the motor is not connected in Star or Delta configuration. We need independent windings.

Here is a short video where you can see the BLDC motor running with this circuit.

Your browser does not support the video tag.

video URL: https://odysee.com/$/download/BLDC-Bedini/6651408372c98cca34376cee075161d360ca419c

greetings!

PJKelly Battery Charger

2023-11-28T15:44:47.9630000

Lately I pulled out of my bench a coil I wound years ago to attempt a project from PJKelly Ch33. It is wound with 100turns bifilar coil, and on top of that around 190turns of wire(I ran out of room to do a full 208 turns).

The bifilar is ran as a simple joule their, with a 5k resistor at the base. I haven't had a lot of time to completely test the setup, and verify that an actual charge is put on the receiving battery, and I will upload pics and details later.

The first battery I connected was the small one you see in the video, it started with 1.28volts(so I assume it's a bad battery). My PS wouldn't even charge it. After 2 hours it read around 7volts. I charged it all night and it's now up to 10volts, the circuit without a bulb is only consuming about 20ma.

So far the circuit seems promising, though will probably need to make coils wider, and more turns on secondary.

https://www.youtube.com/shorts/yPkBRPizIkM

When I get home I will show waveforms, also some questions I have regarding strange things that happen when a ground is connected.

Ethernal flashlight ruslan akula lasersaber

2023-10-12T03:11:03.1030000

https://www.youtube.com/watch?v=YAxT_dYmrLU

E-coil experiment

2023-09-06T18:39:08.5570000

This Japanese, Miroku Watanabe has on his blog to download the experiment in pdf here:

https://watanabe-japan-miroku.jimdofree.com/

Interesting to see other experience on energy,

https://www.youtube.com/watch?v=sS2OUgbs1CY&t

It uses 6 E core ferrites Core, L1 150 tur ns and L2 300 turns, it seems to have twice as much power at the output

Another experiment here: https://s6cvq6nolqjf.blog.fc2.com/blog-entry-29.html

Jagau

Joule Thief (blocking oscillator)

2023-05-15T12:05:39.3030000

Nowadays several circuits are used to understand blocking oscillators. The famous Joule Thief is the most popular to date for experimenters on different sites to understand the operation of a so-called blocking oscillator.
You can make a dimmable blocking oscillator with a very small 2N7000 type NMOS. Here is his circuit;

You have to enjoy building these basic circuits which lead to a greater understanding of oscillators. If you have other interesting circuits, don't hesitate to post them here.

The performance of the Thief joules is no longer to be redone with several serious studies demonstrating its usefulness like this one ;

Joule-Thief Circuit Performance for Electricity Energy Saving of Emergency Lamps (attached file)

Or this one;

The experiment proves that the system produces high gain pulse electricity and driven LED without broke it out. (attached file)

CONCLUSION
It has been proved that a Simple Blocking Oscillator produces high voltage pulses gain approximately to 7 times bigger than its input voltage. The gain is caused by the inductor’s magnetic field as a response of high speed pulse of current feeds from the power source that is regulated by the resistor and transistor, respectively.

Jagau

Behavior and analysis of the inductor

2023-01-07T23:22:35.7300000

The behavior of an inductor in an electronic circuit has very interesting phenomena to observe. The purpose of this thread is to study some of them using a simple circuit.

Jagau

Tesla Pancake coil radiant energy

2023-02-02T06:40:25.3170000

Hello again
In the previous post from my ZPM reply (thread)I tried to expose (unsuccessfully but due to lack of time), an experiment approached by many researchers, namely the special characteristic of the pancake coils of the great Tesla.
Most have tried various circuits with only one coil, but few know that the result is totally different with more of them. I use three pancake coils - one on the input and the other two connected as oposition. The result? An energy amplification at the radiant level with a consumption of 200-300 mA that can be transmitted through a single thin wire, at a distance. Not dangerous (as you saw).
The copper wire is connected to these coils, not to ground. Today I will try to represent this experiment more clearly. In any case, we are talking (I think) about that longitudinal energy that friend Vidura talks about in his thread

Wistiti experience :)

2022-12-27T10:53:16.6330000

Hi freind! I will put in this tread my personal experience. No matter for me, the divergence between both forums. For me, it's 2 groups of buddies who are looking towards the best for everyone. 🌞 Just share everything together. We will find!

Self-Sustaining HV Charge in Electrostatic Rotary Converter

2022-06-24T02:21:54.6070000

It's a real machine built by Eric Dollar and Chris Carson

Self sustaining

https://www.youtube.com/watch?v=AJwD23PEL9Q

Spark2