Latest Forum Discussions

BUNK "OverUnity Transformer" Finally SCHEMATIC and REPLICATION available

2026-03-14T09:14:47.8370000

Complete manufacturing instruction:-

(Russian language)(very old mercury version; - mercury amalgam)

Simplicity and power of ether

2026-03-08T12:44:01.7030000

I am sharing with you these important words from Pachuka for coil construction.

The key point of the circuit is that the installation uses two sources of oscillation and a frequency beat, operating at close but not identical frequencies. When they interact, an effect occurs, called a beat. A lower envelope frequency appears, but it still carries the energy of the two initial oscillations. From the perspective of the etheric model, this can be written as follows: one frequency rotates the medium, the second breaks the symmetry, and their interaction creates areas of increased movement.

It is in these areas that the maximum release of energy and the formation of a directed flow occur. When the beats are established, the ether no longer simply oscillates; it begins to move, redistribute itself, and form a flow. And here's the important point: this flow is not chaotic; it is directed by the structure of the field, which is determined by the system of coils. The role of the coils is that of an interface.

The coils on the right are not simple inductors, but rather an interface between the ether and the electrical circuit. They are tuned, one to a quarter wavelength, the other to a half wavelength. This tuning creates a phase shift, an asymmetry, and the conditions for energy extraction. Figuratively speaking, the coils act as receivers within the ether flow.

A current appears when the ether passes through the area of the coils; the field changes, inducing a voltage and the movement of charges.

Jagau

How to Help Research Forum Beyond Unity.org

2026-02-27T13:38:03.3500000

Hi ScientificVoyager,

Yes, I received your donation.

Keeping it for the incoming months expenses.

Thank you, it helps a lot, much appreciated !

Regards,

Fighter

Replication Don Smith's Device No. 9

2026-02-10T23:13:02.8530000

Quoting:Fernando

Hello ScientificVoyager, how are you? I've been giving your system a lot of thought, looking for potential improvements. Something occurred to me regarding the rotor position: did you align the center holes simultaneously? A possible improvement or test would be to advance one rotor. Specifically, when the center hole of one rotor aligns with coil number one (left), the second rotor's hole could be positioned approximately one-third of the way past coil number two (right), creating a phase shift. You could also test each coil separately, as you did with the capacitor, using an ultrafast diode in only one leg of the coil. The coils on the left and right should not be mixed in this way, as high-voltage peaks are collected by the capacitor in resonance, and a diode in the positive leg will not destroy it. As you mentioned before, if the gap between the rotors and coils is 5 to 7 mm, as in your video, you can lose 60 to 80% of flux. If you have the time, it might be worth considering. Thank you very much.

Best to you and yours.

.

Hi Fernando. You raise a very interesting point. I'm currently waiting for the new rotary discs; they should arrive this week. Overall, I haven't decided on the coil arrangement relative to the disc yet. I'll be repeating the tests from scratch with the new rotary discs. Before I place all the coils around the rotary disc, I first want to explore every possibility that will be most efficient. I plan to place three sections on the rotor axis, consisting of magnets, coils, and the rotary disc. Each section will be offset by a certain angle to reduce the cogging torque between the disc and the coil core.
I'm still thinking about this and have some thoughts. Testing will be coming soon.

Have a nice day/evening

Spinning Magnets Lab

2026-03-13T20:42:16.1930000

changes since v0.8.6:

- Introduced authoritative induction runtime (fully state-driven, deterministic)
- Implemented self-consistent electromagnetic coupling solver
- Added magnetic back-reaction and reaction torque calculation
- Integrated electromechanical power balance (electrical vs mechanical)
- Upgraded coil model to surface-based flux integration (quadrature)
- Added configurable coil quadrature (square + circular, multi-order)
- Implemented rotor sweep analysis engine with aggregated metrics
- Introduced efficiency map (RPM vs load, 2D grid with convergence tracking)
- Added worker-based background processing for heavy computations
- Improved modular architecture (runtime split into dedicated modules)
- Added solver diagnostics and model comparison tools
- Stabilized numerical behavior and convergence handling
- Improved UI consistency (panels, status bar, interaction modes)
- Ensured full compatibility with import/export project schema

with more workers life is easier

Delayed Lenz Effect

2026-02-14T14:32:04.6370000

just released v1.1.6
- CH5 (if selected) shows p(t)=v(t)*i(t) as new plot in Scope
- Import Feature
- TANK view
- Value Reference Page
- and more calculated Metrics

RLC-Analyzer on Docker Hub

Download Self-Host Bundle (v1.1.6)

or test it here

regards

for updates on this subject i use Telegram Channel.

Notifications

2022-08-13T23:54:30.2670000

Hello,

The relocation is complete and we're back online.

As I expected the ISP was reluctant to open the required ports and let our server outside its firewall but in the end it had no choice because I presented solid arguments.

They warned me that the server will be exposed to attack attempts and so on but that's not a problem because our firewall is able to handle thousands of scans and attack attempts every day since the first day we came online. 🙂

What I noticed is some decrease in the speed of the internet, the connection is not as good as in Bucharest.

It's still a fiber optics connection, the speed is decent but the ISP explained that the infrastructure in the area is not as performant as the one from Bucharest. It's nothing which can be done about this.

The relocation was necessary because now I can handle any issue fast, it's not necessary anymore to administer the server remotely and sometimes to travel hundreds of kilometers when there is an incident and I cannot connect remotely.

@Jagau, I'll take care of placing the Paypal donation widget on the right-side of the site as soon as I find some available time for it.

Regards,

Fighter

VENDOR | Solid State Energy Systems

2025-12-18T20:29:34.1500000

Tried to go to Crunchbase to get info and was blocked. But it did say this in the splash:

"offers PCB reverse engineering" tells me they are a rip off.

The old saying If it sounds too good to be true, it probably is the classic trap.

thay

The different ways to charge a battery

2025-12-08T00:53:25.4130000

Fork Lift batteries update:

Battery #1 charged almost fully with the large radiant chargers, first using the 2V cell rejuvenator, then the industrial 12V charger, 6 cells at a time. It needed prolonged rejuvenation.

Battery #2 had a negative voltage cell, which indicated it was destroyed, according to experienced specialists. The rest of the cells did not charge much above 2V.

These batteries were abused by the estate caretaker that exposed them to sub-zero F temperatures, failed to charge them, and let them sit dry for long periods. The individual cell casings where swollen and the electrodes raised, indicating frost heave and expansion.

Due to lack of time, I abandoned further rejuvenation and asked a friend to recycle the lead at his discretion.

Inverters/Solar chargers:

I relocated the inverters to our new location. It took 3 large men to remove them from the wall and load them on a truck. They weighed around 150 kg / 350 lb and now are in the barn until I can find a place to remount them.

The inverters can be repurposed with Lithium batteries, and the solar chargers will be updated to mppt. The original chargers had 70% efficiency compared to mppt devices, which are in the 90s.

Future battery maintenance:

When I return home, I will gather components to replicate a series of Baerndorfer's radiant chargers. A couple weeks ago the Renaissance Charge - Universal Charger developed a short somewhere, and trips its circuit breaker. I have over a dozen vehicle batteries in maintenance mode during the winter season, and the radiant charger helped keep them fresh and rejuvenated for many years, especially the 12V deep-cycle hybrid batteries.

Current:

I am away from the estate repair project to take care of matters at home during the winter storms, but have to return in a few days to finish up.

Spatial Energy Coherence circuit

2023-02-14T23:29:23.0070000

Hi everyone

I built an 11 MHz power oscillator like this one:

with a few basic modifications, IRF510, 2n3904, L2 isolation with second battery, NMOSFET with medium power but a fairly high rise time about 30 nanosec.

Doc Stiffler's coherence circuits now work at a much higher power level.

Experiments will show this soon.

Jagau

Old video about cold electricity

2026-02-03T21:18:54.7170000

Replying To: Fighter

Got it, thanks.

Fernando: Donald Smith replication

2026-01-31T19:23:17.8100000

Replying To: Jagau

Yes hello, will be in Tesla Universe page 57, It is the drawing in the botton.

Resonance energy and Don Smith Proof of Concept

2026-01-10T20:07:54.4130000

Hundreds of researchers have tried to find the DS effect, as can be seen on various YouTube channels and numerous forums. This leads us to wonder how to pump this extra energy contained within the mass of our planet.

Tesla wanted to share electricity freely with his Magnifying Transmitter, he transmitted this vast amount of energy through the ground to be collected at different points on the planet using tuned receivers.

D.S. tells us that immense quantities of energy are buried in the soil of our planet. Eric Dollard demonstrates the full power of the telluric currents present in the ground.

see this world magnetic model is explicit how great is magnetic field in ground of our planet;

My next research will therefore focus on this avenue, which seems to be the only plausible one.

The big question: how to pump this energy, and with what kind of pump controlled by a dam?

As per WIKI

A telluric current, or Earth current, is an electric current that flows underground or through the sea, resulting from natural and human-induced causes.

These currents have extremely low frequency and traverse large areas near or at Earth's surface. Earth's crust and mantle are host to telluric currents, geomagnetically induced currents caused by changes in Earth's magnetic field due to solar wind interactions with the magnetosphere or solar radiation's effects on the ionosphere.

These currents exhibit diurnal patterns, flowing towards the Sun during the day and towards the geomagnetic poles at night.

Could it be possible that if we send a standing wave into the ground, with a certain power, it could become the carrier of this much greater energy?

Jagau

YoElMiCrO's Ferro-Magnetic Resonance

2024-02-09T00:25:26.3270000

Quoting:YoElMiCrO

Hello everyone.

This video is an update.
Don't look at the watering hole on my table,
I haven't had time to pick her up.
In this case I take the potential energy
to recycle for the next cycle and for load.
I use only the generator to control the Mosfet.
There is still a need to design a control circuit that
meet specific requirements that maintain the phenomenon.
When it's 100% autonomous, we can all prove it.
I'll keep you posted.

Your browser does not support the video tag.

Thank you.

YoElMiCrO.

@YoElMiCrO, any update with this ?

Regards

Negative‑Resistance Behavior of the Diode Plug

2026-01-17T16:01:23.0800000

Jagau,

The article is very interesting. To cut to the chase, I focused on the Measurement section.

Avramenko's "AC voltage source is a sound generator G3-56/1". The total frequency range is 20 Hz to 200 kHz.

The D208 refers to a Soviet-era general-purpose silicon alloy diode: Д208

Peak Reverse Voltage: 300 V.
Average Forward Current: 100 mA.
Operating Frequency: Up to 1 kHz for standard operation, though it can operate at higher frequencies with increased reverse current (up to 500 µA).

Avramenko’s forks often operate at high frequencies (kilohertz to megahertz range) to capture displacement currents. Modern equivalents should prioritize higher speed (fast recovery) and appropriate voltage ratings:

Standard Rectifiers (General Use):

1N4004: Rated for 400V / 1A. Slow recovery times, limiting performance in high-frequency setups.

UF4004: An "Ultra Fast" version of the 1N4004, better suited for the high-frequency pulses often found in Avramenko's experiments.

High-Speed/High-Frequency Equivalents:

HER104 or HER208: The HER208 specifically handles up to 1000V / 2A with a very fast recovery time of 75ns.

1N4937: Fast recovery rectifier rated for 600V / 1A.

BAV21: A high-speed switching diode (250V / 200mA) suitable if the current requirements are low but frequency is high.

Russian Alternatives:

KD208A (КД208А): A later Soviet/Russian equivalent rated for 150V / 0.5A.

D209, D210, D211: Direct members of the same family as the D208 but with higher voltage ratings (400V, 500V, and 600V respectively).

Avramenko's measurements were done at low frequencies, using electronics available in the 80's.

This highlights two points:

1) Tests can be done by any experimenter, with basic audio equipment and inefficient components, to demonstrate the principle of single-wire power transmission.

2) Using high-speed/high-frequency components, with modern signal and measurement equipment, the results should reveal greater efficiency.

MathJax feature integrated into our site

2026-01-17T11:44:52.9800000

You're welcome !

Everything for our team ! ☺️

The Don Smith Effect

2023-05-28T02:54:30.0100000

For the continuation of the D.S. effect

An image from Rick Friedrich's book, page 107 '' Don Smith magnetic resonance energy crafting''

Handmade by Mr. Smith, probably the small coil at the bottom (near the battery) to recharge the battery itself, but as you can see a variable resistor and an on-off component (a diode in series with the positive), what's missing from the myg design.

Jagau

Happy holydays

2025-12-22T13:23:45.2630000

https://www.youtube.com/watch?v=oyPbd5_annI

Happy New Year to everyone !

Warm greetings and best wishes to everyone on the New Year 2026 !

May the year ahead bring peace, good health, happiness, prosperity to all and give us more available time to work on our projects !

Fighter

Small input about MerLynn

2025-12-26T23:07:08.5330000

thank you

For Darediamond - goodbye, we don't need scammers here

2025-12-26T19:47:36.2800000

Quoting:Darediamond

If I have not been able to get result with the DON EFFECT GENERATOR, never will I come on here or other places you discovered to share it. Infact, I never even request that anyone should contact me on overunity.com before a Man from Georgia did so few years ago. He as well dig further about me and discovered my post on www.nairaland.com I am A Proud NIGERIAN. Infact I am Positively Arrogant About My Nationality Even To Your Very Face And Others Like You. Ask Bri77 who linked up with me via WhatsApp what I discussed with him and showed Him. I leave you alone in your childish thoughts.

Thank you for taking the time to talk to me. What you shown to me was information given by don smith. The only information that was new was you mentioned something about industrial salt being put where the copper plate is buried 10 ft deep for the earth grounding. I did not see the working device. You showed me the pwm generator still unopened it look like. I'm not sure if you had a working device somewhere, since it was not shown to me.

You asked if I would be interested in a motor, I'm not sure why since a solid state generator would be a lot better than having something with moving parts.

There's a person on youtube that has a lot of don smith videos, but then in his later videos (some years later) he shows installing / using a lot of solar panels. He was selling some parts/configuration for don smith systems. This is weird to me since if he had working don smith devices then why would he even bother with solar panels?

What we know exactly about Don Smith Device

2025-09-26T10:19:28.9270000

Quoting:Jagau

Answer this simple question:

Why are you asking people to contact you privately on WhatsApp?

Jagau

My friend,

The reason is he got nothing and knows nothing, he is just a scammer.

More in my OSINT research about him in this thread.

Sorry about this, I needed some time to find who this guy is, I don't want to risk to be unfair and ban genuine researchers.

Quoting:ROmanian

He will make noise over and over again, and in the end he will get banned.
Just my 2 cents.

Well, I guess you won this bet faster than you expected. 😄

He was already under investigation...

Regards,

Fighter

Drag-free motor

2025-12-09T19:06:00.4730000

You are on my thread here make yours please.

If you want to try making something with your 3/4" round plywood with magnets all around, without any technical explanation you failed. This is not a political or flying saucer forum here, it is a sharing energy forum.

Jagau

Answer this simple question: why are you asking people to contact you privately on WhatsApp?

Issue with the personal messaging system

2025-12-22T13:37:19.6300000

Thanks Fighter,

I was able to send you a private message fine now.

Creating Beyond Unity using the Alchemy of the JoeCell

2025-12-06T21:18:29.4430000

Well, let's see. A demo (which can also be validated by the builders from our team to confirm it works)

I accept a presentation of an Atomic Theory based upon Vibrating Magnetic Light Structures can be described as a word salad but it can also be a Thesis, even a paradigm shift or even a New Physic upon the planets consciousness.

I have videos of demos for all to see. Anything you see or read, as in what I write can be your own personal demo. To validate an Invention where the Principles are the Magnetics of the Energy in the Frequency of Vibrations, have never before been Conceptualized in Civilian Science. Namely the concepts:

· Everything is Water

· Water is a Light Crystal

· Electricity derives as its ‘Origin’ from the ‘energy difference’ between each vibrating Crystal.

· The easy Validated Methodology of Neutral Plate™ and Same Pole or Unified Mono Pole in Ferrite ring magnets has simply never even been thought of before or at least not since Hathors Temple went under the sand.

· In Alchemy Terms we are adding Fire to Water.

· Every thing is a Rotating Magnetic Field

· Plenty of experiments to prove the water molecule is imaginary.

We are the Inventers. All validators come for at least 3 days like Ok Tedi Mine owners, We don’t give IP away to validate. We present and deliver if you come to us.

We have failed miserable in the Corporate sector and only certain private individuals are receiving IP. Doesn’t matter if the Qld Minister of Mines and Santos Director of R&D along with 3 professors and several private middlemen can watch tar turn into pure water, (that the Santos guy drank and then left and said I await the report) the Professors will not sign off on a report that defies everything they know and put their reputations on the line. No report by experts validating the results and the Committee/boardroom is never even told. The list of the demos using fluids they bring is 20 years long. Academia is in Denial.

Much can be said of what is on the table here.

The Magnetic In Line Cell exists in Limbo. It can be seen here Charging ocean water where I am the cameraman. It can see the light of day, with just a little notice. Of all Joe’s inventions, this one captured the imaginations of many important people. I believe more of this Cell design has attempted to copy and built than water Cells.

It has Charge Treated raw sewerage from the cattle yards for a Prince of Dubai. Brisbane Sewerage Works. Oil Tech Recyclers. The Director of Earth Resources for the Victorian Govt. Still runny Waste Concrete disposal. The Test report Attached uses this same Inline Cell to treating Acid Mine Wastes.

Gold Acid Mine Waters strong enough to melt fingers, were treated with a TubeCell, a ConeCell and a Magnetic In-Line Cell. The Cell in this report is the same Cell in the above desal video. This Cell made with this Technology of Twin Rotating Magnetic Fields Unifying within a washer that requires the Water to be rotated anti clockwise with a 4 bladed fan as it enters the Cell, to create the necessary parameters for Aetheric energy manifestation. It has 3 Rotating Magnetic Fields, where all 3 meet at an Equilibrium or Focal Point where ‘rotating magnetic’ water flows through the Unified or Mono Pole Field created by the Magnets and washer.

If you want to play with this technology, start collecting Speakers and ‘washers’ glued on the backs of the speaker ring magnets. Then you will have the 1st pieces to determine ring magnet size and water pipe dimensions. The First one built only had one set of magnets on the pipe, not the 3 gangs like in the Desal video/Acid Mine report

One is also invited to trade for a Cell made for your personal use. You could own an oil tanker and one sail from port to port to unload because its fills up with a Sea water into Oil JoeCell getting there. You get to see it working first. Then its your problem how to stay alive but life always was a challenge.

Interesting points in the Mt Carrington Acid Mine Drainage J-Cell Multi-Process Treatment Trial

· It was done in 2009 but Until I requested Joe be given a Copy in 2014, did Joe see the printed results.

· Hatlar Group specializes in Industrial sized environmental problems and are leading experts.

· The inline magnetic J-Cell tests (tests 4, 5, 8 & 9) all showed significant reductions in the parameters of importance that were tested.

· The levels of removal achieved in the magnetic J-Cell resulted in treated water which either exceeded or were close to the ANZECC Guidelines for drinking water except for the parameters, cadmium and manganese. (a purpose built Cell can be made)

· Not mentioned was Joe drank from every sample as nothing beats the taste test in potable waters.

· Anything Joe can do with an ‘electric Cell’ he can do with a Ring Magnet Cell. Magnets are Lumps of Electricity that’s available from their eddy currents when used statically.

· The graphs of page 8 gives the data on purity achieved, but we have had pure water tests come back from the Lab with 300,000 ppm of Chromium from BlueBerry farm tests yet was sweet crystal clear water. Litmus tests aren’t suited to Magnetically Charged Water. The Govt Lab at the Local Uni got so they would only print the figures and not where they came from.

The Magnetic Fields are Orientated as a North Pole Negative Field, as North Pole energies ‘clean’ or restructure waters (everything is water) back to its Pure made in heaven format. If we designed the In Line Cell as South Pole Positive, you can fill oil tankers on the high seas or your billion dollar yacht.

Gather Speaker magnets. Ply the washer off the back. Place it over (try both as the effects are entirely different) either a galvanised water pipe or a 316L stainless steel pipe. Must be a snug fit and no heat to make it fit. Buy a couple ferrites (neo’s simply will not work in any JoeCell) ring magnets that slips over the pipe and doesn’t touch it by about 1mm at least, can be up to 5mm away. The washer also must be larger by at least 1 to huge mm for larger pipes with smaller magnets. and run all the waters you can find around the place. Very unlikely it will be perfect but you will get effects. If you can dowse the Fields, or see the Fire like Joe, you will get the Rings orientated to each other better. When the guy dies there will be no more JoeCells.

There is another effect. (and so on and so forth) Where the Mild steel washer placed between 2 North Pole Fields and left for a day, when separated from the magnets, the washer will not rust. Like the Pilar of Iron in Delhi, to place this IP over a blade or barrel, will see it rustless iron. Valuable in the right hands.

Another effect is the Gauss increases a min 4 fold. Such a design would improve all of Industry where magnet strength is required. Dont forget the inventor now will you?

Magnetically Charged Water flowing in a Pipe can have Coils on the outside to harvest electricity as there are trillions of tiny Charged Up Magnetic Crystals passing by an infinite number of coils placed along the pipes in any Municipal Mains supply. Similar to charging up ferrite and spinning it past a coil. This prototype unfortunately went down the river in the last flood.

This isn’t so much a specific build but more a validation of Principles to Joe’s inventions to make one doubt one’s programming.

Perhaps those that have a serious contribution should start fresh

Working on it.

Energy Gains in Adam's patent.

2024-09-07T11:38:51.4400000

Yes, no problem Inception. If there are any bugs, let me know.
Your choice of charger is excellent; they are professional-grade, long-lasting, and very efficient for batteries.

Jagau

Micro generator

2022-05-09T10:59:12.9100000

Energy Intake Valve (E.I.V.

PLATE [ D ] of CAPACITOR, WITH A PREDETERMINED VOLTAGE PLACED UPON IT, CAUSES PLATE [ E ] of CAPACITOR TO DUPLICATE -- FROM THE AMBIENT / EARTH GROUNDING -- THE ENERGY [in the form of Voltage / Potential] PRESENT AT [ D ]. WITH AN INPUT DIODE PLACED AT [ C ] AND AN OUTPUT DIODE PLACED AT [ B ], THE ENERGY PRESENT ON [ E ] FLOWS THROUGH A TRANSFORMER INTO AN EARTH GROUNDING. USEFUL ENERGY IS OBTAINED FROM THE TRANSFORMER. DONALD L. SMITH, 14 FEBRUARY, 2004.

CAPACITOR FUNCTIONS

Don Smith wrote:

Two main types of capacitors are found in widespread use; namely, regular ["standard", "conventional"] and electrolytic. Super Capacitors are also becoming more generally available. A Capacitor is a blocking device. The charge is placed on one side only. The other side draws an equal amount of Energy from the Ambient Background.

The Capacitor is an Energy Pump.

The second side captures ambient energy and will -- on its own -- maintain its charge, even though there is energy passing through the outlet [i.e., _flowing through_ this second plate, to go feed the load]. The beauty of this is that, when used with a diode, and / or a diode bridge -- which are one-way devices -- you have an Energy Pump with unlimited output. The reason the second side can perform this unlimited output pumping function is that it feeds from the Ambient. By arranging the diodes, you can get negative or positive output. Positive output will die a heat death [i.e., will be hobbled by resistance, and won't be able to convey energy very far] whereas the negative will run cool. The only limit on the output is the capacitor size. New shoe-box sized super capacitors are rated, as single units, at greater than 400 Farads, and deliver 400,000 Watts of energy storage.

The Device does not deplete if only the output side is used. Since this action has not been named, I get to name it. Further, if one leg of a light emitting diode is attached to the output side capacitor plate, the LED will provide an effective visual observation of the DSE. The main output side should be a diode passing through to the point of use or load. Another phenomenon is observable; namely, a cooling effect, as seen in the heat exchange modules."The capacitor transformer opens the door of an endless source of useful energy".

This why i used two different grounds point. in my micro generator with capacitor is an energy Pump , proof is there.

Jagau

Nikola Tesla

2023-06-25T15:01:54.9230000

To understand the Wardenclyffe Tower, one has to comprehend what constitutes 'electricity' and Radio.

http://joecellwaterscience.com/electricity_7.html

Electricity is a 'function' of the Wave Forms around wires that propagate in the Winds around the Wires.

Radio is a Function of the Wave Forms that surround the Wires (or Aerial) that propagate through the Winds.

Radio and Wireless transmission of 'electricity' are One and The Same. Some 'wavelenths' are more suited to being 'recieved' at the other end.(edit) Because Energy is frequency and Vibration and NOTHING else.

Wireless Transmission of Electricity is a FACT in every Induction transformer ever built, every Induction Motor ever built and every Pickup Coil ever built for a Generator.

Buy promoting Marconi, instead of Tesla, The argument became who invented Radio rather than what Radio actually is. This sleight of hand appears to be working to this very day.

And we pour over the historic manuscripts and fathom not what Tesla meant.

The Aether Field Exists

2024-05-01T22:44:35.9200000

Hi all

Another excellent site, resonant fractals, specifically on the magnetic resonance section.

https://www.resonantfractals.org/Doc/1index.html

Some people have this ability to sense their physical environment in terms of frequencies.

Jagau

Waveform Emergent Mass Theory.

2025-01-12T03:21:52.1870000

In May 1921, Walter Russell entered what he described as a 39-day “cosmic illumination” — a state of expanded consciousness in which he claimed to perceive the inner workings of the universe directly. He later compiled his insights into The Universal One (1926). He sent this to hundreds of leading scientists and thinkers; most dismissed it as metaphysical speculation, except Nikola Tesla, who is said to have told him: > “You have caught the light of cosmic understanding… but the world is not ready for it for another thousand years.” Russell claimed that matter is not a substance, but a form of motion — specifically, light that has been compressed, slowed, and patterned by rhythmic thought or “Mind.” Compression (contraction) = gravitation, forming matter. Expansion (radiation) = the return to the undifferentiated ether or “universal mind.” This compression/expansion cycle is the basis for all creation — not static particles, but oscillatory energy transformations. He saw this as octave-wave motion, analogous to musical scales or light spectra, where all physical phenomena are variations of rhythmic pressure in a single continuum. Russell rejected the dualistic idea that forces are separate (like matter vs. energy, or positive vs. negative). Instead, he proposed a “One Substance” — the universal equilibrium — manifesting as alternating polarities: Attraction ↔ Repulsion Heat ↔ Cold Condensation ↔ Rarefaction He emphasized that these are two phases of one balanced process, not two independent forces. The universe, in his view, is a rhythmic heartbeat of the cosmic mind, not a mechanical system of particles in empty space. In Russell’s cosmology: Electricity is not electrons moving through a void, but spiral vortices in a dense, balanced medium (a “plenum”). The vacuum is not empty but full of latent energy, a field of opposing rotations (similar to what quantum field theory would later describe as vacuum fluctuations). The wave is the fundamental construct of matter — its nodes and antinodes define atomic structure. He described atoms as wave fields, with rhythmic compressions and expansions forming standing waves — decades before quantum field theory and wavefunction interpretations became mainstream. Russell extended these principles into biology and metaphysics: Life and death are simply the compression and release of light patterns. Time is helical, not linear — meaning evolution and recurrence coexist, like spirals around a central axis. --(This part was strange to read, as a few months ago in a dream I was sliding down a helical surface, as I continued to slide I realized I could probably jump to the former part of the surface I was sliding down, and end up in the past part(or phase) of the helical slide I was on.....) This view anticipates the cyclic cosmologies and fractal time models in later systems theory and even some quantum cosmology interpretations. Relation to Modern Concepts While his system is philosophical rather than mathematical, it parallels several modern ideas: Quantum field theory (QFT): Everything is an excitation in a continuous field — similar to his “plenum” of potential. Wave mechanics: Russell’s octave-wave model resembles standing wave structures of particles. Nonlocality and entanglement: His “universal mind field” implies all things are interconnected through phase relationships. Morphic resonance and consciousness research: He saw thought as an organizing principle of matter — similar to Sheldrake’s later ideas. Vacuum energy and zero-point field: His “universal equilibrium” resembles the modern view of vacuum as a sea of energy, not emptiness.

Dmitry Nikolayevich Motovilov

2025-10-20T07:34:06.4300000

Hello everyone.

Interesting document, Baerndorfer.
If you look closely, it fully describes the Floyd Sweet device (VTA).
Thanks for sharing.

YoElMiCrO.

Zero Transformer

2025-10-06T15:14:59.5000000

'Instant' is the last data snapshot. In this run i did 169 iterations and 'Average' is the value we should look at.

have a nice day!

Non Linear Resonance

2023-12-14T02:35:21.1030000

Replying To: Jagau

Hello Jagau, I was wondering how a small SG can output more than 2 Watts (had a bad feelin about calculated numbers) . now its clear . Thank you very much ! I dont get a spec sheet from the chinese FG counter but it seems similar to your frontplate (with LCD) but not identical.

Fighter's Micro-Generator Replication

2023-02-26T21:42:54.4530000

It depends on the area/surface of metal provided on input, the quality of the grounding but also on the environment (weather conditions). You'll notice during storms it goes crazy (it's very sensitive, it "feels" events at kilometers away) like my replica does here.

It works continuously since March 2023.

Jagau specified an improvement where he added a third ground point here.

Also if you want to fine-tune between the brightness and the frequency of the light you can use variable resistors for the 2.2M and 4.7M like I did here.

Yes, I know, everyone have problems with the limited available time for research.

Take care of your health, get well...

Thank you and you're welcome !

Fighter

Fighter's Quantum Power Cell Replication

2024-03-30T11:41:05.6500000

While recording videos for my latest DSE experiments here I found in my phone a recording of one of the experiments I've made with energy extraction from a quantum power cell.

I'm adding it here.

The experiment is simple: the quantum power cell is replenishing a capacitor and I'm using a transistor commanded by the signal generator to discharge the capacitor in a resistor (if I remember correctly it was a 100K resistor).

Your browser does not support the video tag.

The idea is the quantum power cell is continuously recharging the capacitor and don't let it go empty even if I discharge it into the resistor at various intervals.

Regards,

Fighter

Control circuit for Fighter ZPM

2025-03-01T14:42:03.4470000

Hello everyone.

@Jagau.

Can you make the circuit you tested with and
where are the oscilloscope probes?
The power supply shows 20mA @ 10Vdc.
On the other hand, the inductance is 1.6mH while
the frequency is 1KHz @ 25% DTC.
This tells me the following...
di/dt=Edc/L=10/1.6*10-3=6250A/s.
Ton=T*DTC=250uS.
Ipk=(di/dt)*Ton=1.5625A
P(Supply)=0.5*Ipk*Edc*DTC=1.953Watts.
The image of your power supply shows 0,2Watts.
The only thing I can think of is that you have a mechanism
to return the magnetic energy to the supply source,
and what this shows is the power loss.
If that were the case...
COP = [(P(Supply) - Loss) * 100] / P(Supply) = [(1.953 - 0.2) * 100 / 1.953] = 89.7%.

It's fine to change the topic within the thread as long as
it's related to the thread. In this case, it's related to everything we do.
In fact, we all gain knowledge as we interact, so we'll all get to Rome sooner or later!

YoElMiCrO.

Why A Choosen Man Always Walks Alone

2025-09-08T11:28:53.2070000

Adding something similar from Nikola Tesla:

The mind is sharper and keener in seclusion and uninterrupted solitude. No big laboratory is needed in which to think. Originality thrives in seclusion free of outside influences beating upon us to cripple the creative mind. Be alone, that is the secret of invention.

Unfortunately since 2019 we had less and less opportunities to have this kind of peace of mind.

But this doesn't mean giving up, we're continuing on our path to Rome...

Regards,

Fighter

Romanian ZPM (Zero Point Module) - Enhancements Stage

2023-02-13T01:04:00.7030000

Every experiment is interesting and a lot can be learned from both successful or failed experiments.

Plus in a thread you can receive advices or ideas and you can use it later as notes when you need details about them.

When you want to create your own thread feel free to do it.

Regards,

Fighter

Question

2023-01-14T19:28:33.7730000

Ok, I found it 😅

RIGOL MSO5000 Live Monitor (Hacked FW Compatible)

2025-07-12T13:54:38.4830000

Hello Bearndorfer
I'm integrating Linux and Python into another PC. I might be able to follow along.

Jagau

Non-Inductive Coil Experiment

2025-07-14T04:14:28.9500000

There are plenty of different things to try with configurations similar to this,

I believe L2 opposes L1, as does L3(so in a sense L2's magnetic field aligns with L3), it was a long time ago and looking for that sawtooth made me ignore import details. Here i have no capacitor connected to the output, though don't see any switching or voltage droop on load either.

(Note the current measurement through resistor is correct, but it has a diode connected from other coil as well, so its not actually 116ma over entire load.

Aharonov-Bohm effect as zero-point energy concentrator

2022-05-23T23:21:41.8100000

Additionally to the known video from this thread where Tom Bearden explains how his MEG is using the Aharonov-Bohm effect, I just want to add here for later references a letter from Tom's correspondence where he goes in more details:

Dear Vlad,

The only thing necessary to answer is item 7, and we will point out that we use a scheme where the magnitude of the collected output energy depends on the rate of change of the input energy, not the magnitude of the input energy.

He has only read the first patent since the second one is still processing; a continuance has also been filed, and a second PPA is already filed, to be turned into a second patent or change to the first. We now see two additional patent applications to be filed, because of the rich physics that gets invoked. So the first patent does not yet completely describe the MEG, but only one part of it.
One does not get overunity from an ordinary transformer. Yet a PART of the MEG has a transformer function, altered so the output energy magnitude does not depend on the input energy magnitude, but on the rise time and decay time of the input signal pulses. But that's only part of it.
We have stated quite clearly in several releases that the core material (covered in our second patent) enforces the Aharonov-Bohm effect. That effect is not in electrical engineering and classical transformer theory at all, but it is in thousands of papers in the hard physics literature. It's good physics, but not yet included in electrical engineering. Yet the AB effect does appear in the sophomore physics book that the electrical engineer studies. He is just led to believe it has absolutely nothing to do with electrical power systems. He is led to believe wrong.
By localizing ALL the magnetic B-field flux from the permanent magnet in the core material, we have all the normal magnetic B-field energy from the permanent magnet handy in that core location to work with. In addition, nature freely adds the curl-free magnetic vector potential A in the space outside the core. So we have that ADDITIONAL A-potential energy - freely furnished by the vacuum itself - to work with OUTSIDE THE CORE as well as the normal magnetic field INSIDE THE CORE.
Don't worry; quantum field theory already assumes a gauge freedom axiom, which further assumes the ability to FREELY change the potential - and therefore the potential energy - of any EM system at will.
We then perturb both the confined B-field and the external A-potential. Check it out, each perturbation produces an electric field, proportional to the TIME RATE OF CHANGE of the perturbation energy, NOT to the magnitude of the perturbation energy. The time rate of change of the electric fields then produce magnetic fields, and so on as expected.
So we can make large EM field outputs from small EM energy input, by simply adjusting the input wave form's rise time and decay time.
We are able to use both the perturbed B-field flux, as in a normal transformer, and the additional perturbation fields produced outside the transformer. We can easily increase the magnitude of the generated perturbation fields without increasing the magnitude of the input energy.

The usable output energy then depends on how much of that greatly increased EM field energy we then intercept and collect, from these greatly increased PERTURBATION fields. Since the magnitudes of the perturbation fields do not depend on the magnitude of the input energy, then the magnitude of the collected field energy does not depend on the magnitude of the input energy.
', "We run that by again: In the MEG, the magnitude of the output energy does not depend on the magnitude of the input energy. That's totally in violation of ordinary transformer theory.
In short, we bypass an ordinary transformer's necessity of dissipating as much energy in the primary section as is dissipated in the secondary section. That's because a large part of the secondary fields produced in the MEG do not couple back to the input section, in violation of the operation of a normal transformer. It is that "back coupling" of the secondary fields into the primary circuit"

In essence, we pay to "switch" and "gate" some free energy flows provided from the vacuum itself; we do not pay to furnish the energy in those flows! We have an open system far from thermodynamic equilibrium in an active vacuum environment. The vacuum freely furnishes that energy, and we trick it into furnishing more to the MEG than it furnishes to a standard transformer.
', 'The AB effect that tricks the vacuum into furnishing additional EM energy is not in the classical EM model or conventional electrical engineering circuit theory. Something like 50,000 or so, in the full generalization of the theory. This has been around since 1959; but its potential for electrical power systems just was not noticed by electrical engineers. Indeed, the AB effect itself was little noticed by electrical engineers except as an idle curiosity.

If one wishes to understand the MEG, one must go beyond U(1) electrodynamics and classical electrical engineering, particularly classical power engineering. And one must recognize that this first patent is just that: the first of a string of them, with a second already filed.
If one is not familiar with the AB effect, I strongly suggest one study the physics literature dealing with it first, before seriously tackling understanding the MEG's operation.
Apparently we were just the first researchers to recognize that the AB effect had great potential for power systems, and particularly for overunity systems of several kinds. There are already several kinds of MEG, not just one, depending on what is optimized etc.

Now we strongly call attention to something else in conventional electrical engineering. If one merely places a charged capacitor on top of a permanent magnet, so that the E-field of the capacitor is at right angles to the H-field of the magnet, that silly thing will sit there and pour out EM energy indefinitely, perfectly freely, by the conventional Poynting equation S = E X H which has been optimized.

That's how "difficult" it is to get extra energy flow from the vacuum. It's a piece of cake, and can be done for a dollar - anywhere, anytime in the entire universe. One can easily extract as much EM energy flow as one wishes.
That silly little capacitor and magnet already invalidates everything we were told in university about how difficult it will be to ever extract usable EM energy from the vacuum. There is also a form of the Poynting equation for a single dipole, as just the charged capacitor or the permanent magnet. It's already known and accepted.
', "Yet engineers believe that they have to input all the EM energy to a circuit that one can get in the circuit to use. That's not only wrong, it's a bald-faced lie after more than 100 years of that dogma (the Poynting theory dates back to the 1880s).
In the MEG, when we perturb the B-flux with shaped perturbation input energy signals, and the A-potential as well, we create large E-fields. Voila! Real S = E X H energy flow, which now only requires a little ingenuity to intercept, capture, and use. Else one has to get after the universities to destroy the Poynting theory! So we get our extra S = E X H in the MEG and Poynting holds okay. Also, it's AC and so that is much easier to intercept, collect, and use.
A real advantage of the permanent magnet in the magnetic circuit is that the magnetic dipole - in this case, the permanent magnet - does not and cannot be destroyed when the magnetic flux returns back through the dipole, as contrasted to a standard closed current loop electrical circuit which uses half the energy collected in the external circuit to destroy the source dipole in the generator. So our "primary source dipole" is nearly indestructible, so long as no excessive heating or great mechanical shock is received.

Now to critique the standard "wisdom" of what powers circuits. Generators do not power their circuits with transduced input shaft mechanical energy! And that is all that a generator does. It makes that source dipole. That is all that burning the hydrocarbon to make steam to run the turbine to crank the shaft of the generator does. That is all that building a dam to use hydroturbines to crank the generator does. That is all that a windmill uses the wind for. None of all that adds a single joule of EM energy to the external power line. All of the oil and coal and gas burned, and nuclear fuel rods used, and dams built, and windmills built, have never from the heat energy or wind energy or water energy produced a single joule of energy onto the power line.

If the engineers would leave that dipole intact once made inside the generator, a little initial rotation of the generator to get the dipole made ONCE would be all that would ever be needed. But they use the closed current loop circuit, which forcibly drives every "depotentialized" electron in the ground return line back through that source dipole in the generator, continually destroying the source dipole. So the engineers have to keep cranking the shaft of the generator so they can keep remaking and remaking the source dipole inside the generator. No source dipole, no energy onto the external circuit.

The source dipole, once made, extracts that energy directly from the vacuum, transduces it into real energy, and passes that real, observable EM energy out onto the external power line to power it. None of the shaft input energy got transduced to be sent out on the power line.

To understand that, please read why Lee and Yang were awarded the Nobel Prize in 1957, for their work in broken symmetry. One of the broken symmetries long proven in particle physics is the broken symmetry of opposite charges - such as on the ends of a dipole - specifically, that source dipole in the generator, once it is made. That "broken symmetry of the source dipole following from the broken symmetry of opposite charges" has an exact meaning in particle physics, but one that does not even exist in the electrical engineering departments and in the electrical engineering model. When connected to an external circuit, THIS SOURCE DIPOLE - ONCE FORMED - EXTRACTS FROM THE VACUUM AND POURS OUT OF THE GENERATOR TERMINALS A VAST FLOOD OF EM ENERGY, FILLING ALL SPACE AROUND THAT EXTERNAL CIRCUIT AND FLOWING GENERALLY PARALLEL TO THEM. The circuit intercepts a small part of that energy flow in surrounding space, and diverges that part (the Poynting component) into the circuit to power the electrons.

Every circuit we ever built, and those built today, are powered by energy directly from the vacuum, via the broken symmetry of the source dipole or dipolarity - and they always have been and always will be. And Kron was one of the most able electrical scientists we ever produced - some say the greatest.
Sadly, there is not now and there never has been a single electrical engineering department in the Western world which understood or taught what actually powers an electrical circuit in the first place. It isn't the generator dissipating its internal magnetic field energy or the battery dissipating its chemical energy. Yet the basis for the vacuum powering the external circuit via the broken symmetry of the internal source dipole has been in particle physics for 45 years, with Nobel Prize awarded. Inexplicably, it still is not included in electrical engineering, and particularly in power engineering.
The Maxwell-Heaviside-Lorentz model used in electrical engineering assumes an inert environment (the vacuum) which has been falsified for more than half a century. It also assumes a flat local spacetime, which has been falsified by general relativity for approaching a century. If one assumes the external environment is never active, then one does not model nature, as proven in spades in particle physics.

Why our electrical engineering curricula have not been upgraded to incorporate what has already been discovered and proven in particle physics is a giant enigma. Why the more than a century old U(1) electrodynamics has not been upgraded to include the proven active vacuum energy exchange with the system or the proven local curvature of spacetime energy exchange with the system whenever the energy density changes in a local region such as a power system, is also a giant enigma. Lorentz threw out the "windmills in the wind" by putting the windmills in a closed barn, as an analogy! In short, our electrical engineers are taught to just arbitrarily modify the model to select only those Maxwellian systems in equilibrium with their active environment (the active vacuum).

To use a phrase from Tesla, such a continuing mess - with its resulting giant pollution of the biosphere, death of species, rape of the planet, and a coming energy crisis that may destruct many of the national economies - may be "the most inexplicable aberration of the scientific mind ever recorded in history".

Best wishes,

Tom Bearden

As we know Tom's website cheniere.org was shutdown but it's still present in the Wayback Machine here:

https://web.archive.org/web/20210222182024/http://www.cheniere.org/toc.html

The reference to the letter above is here.

Regards,

Fighter

Welcome !

2022-04-28T23:57:01.6900000

Hi Munny,

Sorry for the (very) late reply, I was traveling and saw this on the phone, I thought I should wait until I got access to my computer so I can answer properly.

Thank you, I'm trying to keep the site up to date in terms of technology, performance, security and availability so our team can count on it while sharing ideas, experiments, images, data, video and documents.

Sorry to hear about your health issues, I hope the treatment is going well and in time you'll get well as soon as possible.

As we all can see unfortunately there is almost no activity on other forums and this problem is affecting our forum too, we have lower activity than before. But it doesn't mean we don't continue our research, it's just the problem of missing available time for research and each of us is trying to resolve this problem in his own way.

I understand the idea of Universe striving for stillness, looking for ways to convert high-frequency and high-energy to continuous and low-energy like we do when we convert AC to DC, mechanical work, heat or cold depending on what we need. Maybe we, the humankind, are a part of that mechanism and our way to convert and use the energy is a part of that process.

But because of the greed of the Big-Oil (which blocked for more than 100 years the technologies we're experimenting with here) we don't actually contribute too much to that process because we actually extract our energy from oil, gas, wood, etc. (polluting and destroying our own planet) instead of extracting it from the abundant high-frequency and high-energy Zero-Point field which is all around us and present everywhere in the Universe.

Developing and making these technologies accessible to the humankind is our final goal and regardless of the current difficulties and lack of time we're still here and we'll continue.

Regards,

Fighter

Electromagnetic Field Resonance

2024-06-18T21:19:45.1770000

Replying To: Sandy

I'm working on testing it more to rule out background noise still... I kind of jumped the gun posting this I think, I need to wind a better coil and have it mounted and completely stationary, and maybe use a variable capacitor to tune it better to indeed prove its picking up the signal from the PZT and nothing else (Also considering trying to include some type of faraday like shielding to further isolate it). Right now there's too many variables... there's still a slight possibility the reading came from the coil moving a bit because I was using 20 AWG wire which doesn't like to sit still as I was adding and removing turns to tune it. My next test is going to involve 30 AWG wire that can be more easily manipulated and tuned and a variable capacitor to change the tuning instead of trying to add and remove turns on the fly which could have lead to some partial inductance between the magnet and the coil. If I do get it to work with a completely mounted and still setup and can produce the same results I will be providing further details as to how to recreate it along with how I understand it to be working.

Neutralizing Lenz drag

2025-05-03T10:29:42.0930000

Replying To: Sandy

The illustration is just like that for viewing, it's the poles of the magnets being orthogonal to the coils that prevents Lenz drag from occuring in the system, the orientation of the coils (with or without a core) makes no difference, at least from what I've heard from tests.

Edit: I stand corrected, coil orientation does make a difference.

The Zero-Point Field

2023-02-19T12:54:46.4300000

Zero Point Energy: The Gecko and the Casimir Force

The animal the Gecko, a remarkable little lizard, is able to walk right up walls and across ceilings of almost any material. The way this is accomplished is not via suction or electrostatic adhesion, but rather via an interaction with quantum vacuum fluctuations that are sourced in the zero-point energy of the electromagnetic field (the zero-point field). The Gecko’s feet are covered with millions of microscopic hairs (Figure 7) that when brought close to the surface of almost any material will change the energy of the quantum vacuum fluctuations and result in an attractive force between the hairs and the surface, in what are called van der Waals forces, a microscopic form of the bulk effect known as the Casimir force, which is due to quantum fluctuations [9]. The ability of gecko’s to rapidly adhere and detach at will to veritably any surface is a remarkable form of evolutionary nanotechnology naturally leveraging the ever-present fluctuations of the quantum vacuum [10, Gecko adhesion: Evolutionary nanotechnology]. So ingenious is this natural mechanism, that gecko-like biomimetic adhesives may become the glue of the future [11]

Thus, the humble Gecko extracts work from the zero-point energy of the vacuum field. Walking up walls and being able to hold to the ceiling is work—even with the equivalent of approximately 40kg of weight hanging from the animal (The Force from Nowhere)—it requires a force, and that force would not be possible if it were not for the limitless sea of energy of the zero-point fluctuations of the quantum field that the Gecko draws from. So, if the gecko can utilize vacuum fluctuation energy, why can’t we? In fact, from The Origin of Mass and the Nature of Gravity, we can see how the most elementary of physical properties, like mass and force, are sourced in the quantum vacuum fluctuation energy density.

source: The International Space Federation

https://spacefed.com/physics/what-is-zero-point-energy/

Jagau

Easter

2025-04-20T00:22:22.7170000

Happy Easter

I wish you all a very cheerful Easter

Doug Konzen Electromagnetic Pulse Motor

2025-01-01T16:17:18.0670000

interesting idea:

two long outer coils with north poles facing each other.

2. between them there are 2 more coils (smaller) that rotate on an axis, they are wound so that the north magnetic pole is opposite the outer coils.

Аccording to the author this leads to repulsion (logically), but also to stopping the rotation of the magnetic field inside the coils, which leads to stopping the consumption.

Kapanadze/Akula device replication from Azerbaijan

2023-01-21T02:20:55.9070000

last post from Ruslan is from 12.03.2024

https://energyscience.ru/topic518-441.html

Adams Motor-Generator

2024-08-22T21:44:23.2970000

Hi Olli
After watching your video, I think you are right, the magnets must be on the entire length of the disk. Besides, Adams himself has always demonstrated in these images magnets on the length.

If we look closely at the arrangement of the magnets on the disk, the permutation, instantaneous change of polarization, is done in the axial and not radial direction with the two magnets aligned with the iron and the coil which conducts the impulses.

The magnetic force of the magnets is axial and is exerted in a parallel or longitudinal way. The two magnets in line with the iron core and the coil pulsed. The radial force is on the side at 90 degrees is produced the inertia or mementum of the motor. The axial force powers the motor and the radial force is the resultant of the axial force.

I will remake another disk with 4 standard ferrite magnets and look at the difference in consumption and performance.

Jagau

3 frequencies playground

2025-01-21T08:36:58.8530000

Because i hate Ads and other stuff that are implemented in some online calculators i made one myself for calculating resonance when user give 2 values as input. the page then calculates all relevant data and some graphs together with formulas and other information.

https://aether-research.institute/frequency/resonance-calculator.html

maybe it is also usefull for your own research.

regards