Aharonov-Bohm effect as zero-point energy concentrator

  • 2.4K Views
  • Last Post 4 weeks ago
Fighter posted this 23 May 2022

Hello,

This is the imported thread (from the old aboveunity site) about my experiment investigating the Aharonov-Bohm effect as zero-point energy concentrator:

 

For references I will keep the original posting date for every imported post.

Note: This thread is public, everyone can see it, even the visitors which are not members here.

For the posts made by former aboveunity members which are not members on our site I'll use a member placeholder named UndisclosedMember.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
  • Liked by
  • Vidura
  • Inception
Order By: Standard | Newest | Votes
Fighter posted this 23 May 2022

Hello,

This is the imported thread (from the old aboveunity site) about my experiment investigating the Aharonov-Bohm effect as zero-point energy concentrator:

 

For references I will keep the original posting date for every imported post.

Note: This thread is public, everyone can see it, even the visitors which are not members here.

For the posts made by former aboveunity members which are not members on our site I'll use a member placeholder named UndisclosedMember.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
  • Liked by
  • Vidura
  • Inception
Itsu posted this 13 November 2022

As pointed out by Fighter in my "Fighters ZPM replication by Itsu" thread, i have read through this thread and watched the MEG video etc.

It seems to me that the MEG is not for the faint hearted and as Bearden himself states the problem is to synchronize all the different signals and to get them focussed as "one" to the output coil.
He mentiones that a team of 4 experts in severall electrotechnical disciplines are needed to accomplish this, and it seems to me that no-one up till now was able to assemble such a team to make it work.

Anyway, its an interesting read and Fighters has put already a lot of work and resources into this so it would be a waste to not further put this into the spotlights.

Something that popped into my mind was to use an electromagnet instead of a permanent magnet to see when the cores saturates (spills out), then use a gaussmeter (like WT10A) to measure the field strength and then match it with a permanent magnet.

Thanks, Itsu

Atti posted this 07 February 2023

Not sure if this post fits here. But maybe it's more appropriate here.
There are several factors in this study. So not a specific focus. This is not a measurement, just some phenomena. I will supplement it with some thought starters.

The basic phenomenon:
-An iron core excited by alternating voltage with a series capacitor. Series resonance.(L3-C1)
The inductance of L"1-L"2 is connected opposite each other. There is no inductance, so there is no induced voltage.
-This is connected in parallel with a loosely coupled parallel inductance. (L5-C2)
The excited voltage is initially less because the coupling is loose.
Thus, the resonance point of the two sides is also different.
- If we connect an inductance in series, all parameters change with the entire arrangement. ( Ft coil )
(Inductance is very important here.)
This can be seen on the 24v10w load connected to L"1-L"2. This is traditionally the M.E.G. device control coil. So the primary coil.
  (in the traditional case, think of the inductances L3-4-5-6 as the secondary coil)
  - If the parameters are correct, the parallel LED placed between the inductances L"1-L"2 lights up first. Then, in case of overexcitation, a strong voltage is induced on it. (resonance point)
What happens to the magnetic field of a permanent magnet here? What is happening in space?
- But if there is no L"1-L"2 inductances during the control pause
  voltage can then function as a secondary coil.
That is, it recharges the power supply.

-Necessary conditions:
-different inductance
Let's think about the experience at ZPM or other implementations. (Tesla coil, Kapanadze generator...)
- strive for a higher voltage (amcc320 test video at 3:40)
- think about energy reflection (videos Er1-4)
-adequate capacity

 

Atti,

Fighter posted this 24 May 2022

Thread import is complete, it will be continued from here.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Shadow_ posted this 28 May 2022

“All we have to decide is what to do with the time that is given us.“

Fighter posted this 28 May 2022

Hi Gandalf,

Thanks for the video, it's very interesting.

I'm uploading the video on our server so we can have it as reference in case it becomes unavailable on YouTube:

He seems to use a pulsed magnetic field detector like me, just his tool is much simpler, it's not detecting the pulsed magnetic field polarity (link to larger image here):

The curious part is his tool also looks like a capacitor connected to a LED. I'm not sure if he have a coil in his tool or that's a real capacitor.

If it's a capacitor then his tool is not for detecting the pulsed magnetic field, maybe it's for detecting pulsed electric field and that's something totally different. 'Cause that would mean there is a pulsed electric field around the core, exactly as Bearden said, as a result of the Aharonov-Bohm effect.

I checked the menu language of his oscilloscope, it's Chinese. So he is in China or at least he's speaking Chinese. I asked him on his YouTube video about that tool.

About the part of making sure the permanent magnet field is entrapped into the core but it's not spilling outside the core I think there is a simple way to achieve that: I'll use one 20x20x25 mm ferrite magnet and then add 7x7x25 mm ferrite magnets one by one while using a small piece of iron put on the core surface doesn't remain attached to the core.

In other words I'll keep putting small magnets inside the core while making sure there is no magnetic field on the surface of the core capable of retaining a small piece of iron.

I think it's a simple but effective way of achieving the scenario described by Bearden without using a magnetometer.

I'll see if this idea works.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Shadow_ posted this 19 July 2022

atypical current measurement with a clamp meter

by Stephen Mark

  

time: 5:42

“All we have to decide is what to do with the time that is given us.“

Fighter posted this 27 May 2022

Hi Atti,

- I don't believe in exotic formulations. No voodoo.

It's nothing about voodoo, it's physics. The Aharonov-Bohm effect is a fact and was demonstrated.

You shown a device without permanent magnets so it's obvious the Aharonov-Bohm effect can't manifest itself (as Tom Bearden describe it) in the device.

We just need to find new ways for using it in the domain we're making research in. These new ways can be considered "exotic" if we compare them with what the official physics tell us about what's possible and what's not possible.

-Or did you even give incorrect information about the entered and ACCURATE measurements? Even intentionally?

...

Why don't you dare describe more information?
No.
Not because you did NOT test the SPECIFIC PARAMETERS properly.

I don't understand this part, are you saying I didn't gave correct information ? Check my ZPM threads, I think you will not find anywhere on internet a more accurate description (with photos, measurements, schemas and everything) for any device or experiment related to zero-point energy. I didn't hide anything.

So what you are saying is based on what ?

I'll just get over this, probably I misunderstood what you said, maybe it's a Google Translate problem.

Still, if you meant to say I did hide information or misleaded others then you're wrong. I'm not in this research to hide information or to mislead anyone, I would have better things to do with my time and my money than to spend them just to mislead others.

Not because you did NOT test the SPECIFIC PARAMETERS properly.

Which specific parameters I didn't tested ? I presented waveforms, measurements on input and measurements on output. Based on that other members calculated ZPM's capabilities. So please be more specific about what parameters were not tested properly.

This thread is for experimenting with Aharonov-Bohm effect, not to be spammed with false accusations and stuff like this. If you don't have additional tests or data to add related to this experiment please don't spam it.

For false accusations and stuff like that you can post them on AboveUnity, it's plenty of them there.

Not here. We're here for experiments and sharing results. And advancing on the way to our common goal: a public overunity device to enhance everyone's lives. That's our mission.

Thank you,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Jagau posted this 27 May 2022

You will understand that doing experiments is not the easiest thing, even more to explain them on a forum which (no matter the type of forum or the place) you have different people with different skills and knowledge.
Reporting what a person said or did it is very important to place the context in which it was said.
Electronics allows us to better understand something that others cannot understand.
Do you know several inventors who, for fear of being copied, say everything in their patent?
Example TESLA, have you ever managed to do one of his experiments?
We are here to share what we experience, but no matter where you are, sharing is almost non-existent very few experiences are replicated and done successfully.
So if we can change something I will continue here and elsewhere experimented it is a first prerequisite. Spark2

Fighter posted this 27 May 2022

Do you know several inventors who, for fear of being copied, say everything in their patent?
Example TESLA, have you ever managed to do one of his experiments?
We are here to share what we experience, but no matter where you are, sharing is almost non-existent very few experiences are replicated and done successfully.
So if we can change something I will continue here and elsewhere experimented it is a first prerequisite. Spark2

Yes, I'm aware about inventors not saying all the details.

That's what experiments are for, to verify what they said.

I'm not sure everything Tom Bearden says is 100% true. But I try to use my intuition to find things which could be possible in what he said.

So in this case I think what he says about employing the Aharonov-Bohm effect in the functionality of the MEG is a distinct possibility. A possibility which I chosen to check through this experiment.

This experiment was interrupted (like my other experiments) because of an event which occurred in my life last year in October. You know what I'm talking about. But since then I tried to get myself together again and if possible I will continue them.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Atti posted this 27 May 2022

As I wrote: THERE IS CURRENTLY NOT A PERMANENT MAGNET.

This is INTENTIONAL ORIENTATION in this direction.
In this form, I wanted to conduct a direct investigation. In my opinion, a comprehensive investigation covers everything.

Obviously, this does NOT apply to the Fighter device. So I did NOT understand the ZPM device !!!!! Because that's another method!
I'm sorry I misunderstood you.

We just need to find new ways for using it in the domain we're making research in. These new ways can be considered "exotic" if we compare them with what the official physics tell us about what's possible and what's not possible.

 

 

I think I'm looking for new ways too. Not everyone understands this.

 

Not here. We're here for experiments and sharing results. And advancing on the way to our common goal: a public overunity device to enhance everyone's lives. That's our mission.


So far, I, too, thought I would share the experiments and results (even if negative) with everyone. But you may not need everything.

I'm sorry for the misunderstanding. Only good intentions guided.

 

Atti.

 

Close