BTG research

  • 3.5K Views
  • Last Post 3 weeks ago
Vidura posted this 03 August 2022

Hello Friends, I will import this thread; from the backup forum to the public category ,it is dedicated to the BTG devices like the ones shown by Ruslan and Akula. The Goal is to gain knowledge about the involved principals, and hopefully to achieve a working, self-feeding machine. Regarding the tier2 category , I want you to know that I was really tented to post for general public, and certainly the thread will be moved in the replications category when the time is right. But I also know that various persons got in serious troubles , and likely a young man lost his live, because this is the kind of devices produced in series would sensibly cut in the profits of the big energy companies.

We will in a first step go in diakoptik manner thru the different parts of the device and make different kinds of experiments and tests to get basic understanding of how this devices are working, and the interaction of the different parts. Also we will collect information from various sources from the original Builders. I would encourage those of you , who are interested in following or participating in this project, to read the thread about longitudinal waves , as this describes one of the  basic physical principals involved in this device.

The First Part of the device we will cover is the push-pull converter. It's function is pumping charges, an analogy would be the electron-gun in the CRT, it is the source of charges. There is no magic in this part, it is just common EM technology, there are different topologies which could be used, half or full bridge would be suitable. For low frequency devices like the Kapagen also an of the shelf silicone steel transformer could be used. It is important that the output is AC. In the research we will stick to the push-pull topology for the ease of switching the two low side IGBT's. Here some images from testing this stage:

As I have time ,Ill continue to upload content and updates or corrections.

Vidura

Order By: Standard | Newest | Votes
Vidura posted this 03 August 2022

Hello Friends, I will import this thread; from the backup forum to the public category ,it is dedicated to the BTG devices like the ones shown by Ruslan and Akula. The Goal is to gain knowledge about the involved principals, and hopefully to achieve a working, self-feeding machine. Regarding the tier2 category , I want you to know that I was really tented to post for general public, and certainly the thread will be moved in the replications category when the time is right. But I also know that various persons got in serious troubles , and likely a young man lost his live, because this is the kind of devices produced in series would sensibly cut in the profits of the big energy companies.

We will in a first step go in diakoptik manner thru the different parts of the device and make different kinds of experiments and tests to get basic understanding of how this devices are working, and the interaction of the different parts. Also we will collect information from various sources from the original Builders. I would encourage those of you , who are interested in following or participating in this project, to read the thread about longitudinal waves , as this describes one of the  basic physical principals involved in this device.

The First Part of the device we will cover is the push-pull converter. It's function is pumping charges, an analogy would be the electron-gun in the CRT, it is the source of charges. There is no magic in this part, it is just common EM technology, there are different topologies which could be used, half or full bridge would be suitable. For low frequency devices like the Kapagen also an of the shelf silicone steel transformer could be used. It is important that the output is AC. In the research we will stick to the push-pull topology for the ease of switching the two low side IGBT's. Here some images from testing this stage:

As I have time ,Ill continue to upload content and updates or corrections.

Vidura

Jagau posted this 3 weeks ago

Thank you Vidura an interesting experience to follow
Jagau

Vidura posted this 27 December 2022

First I want to make clear that whenever possible I adhere at classic physics, which IMO can satisfactory explain over 90% of all observed phenomena. But not all. On the observations of the mentioned effects I will remark the following : 1. The phase shift between the two scope traces. If we consider the effect as produced by Coulomb forces, the influence on the unconnected scope probe should be bthe same as exerted on the reception coil. But there is clearly a difference of 90° compared wit the bifilare cancelling Coil. 2. The assimetry of the positive and the negative halfwaves.There is around 5 volts of difference in the potential, so it seems that the coupling is prevalent on one polarity, positiy on the terminal of the bifilare section. 3. The long time interval until reaching the maximum amplitude. It lasts around 5-7 second's until reaching the maximum. I have observed that there is a kind of storage of energy related to this effect. When the experiment is repeated several times, the pattern change and the first time interval of powering up becomes faster. When de device is powered on for first time after a longer period of staying unconnected, it is much slower and clearer to observe. See in the short addition below:

Vidura

Vidura posted this 26 December 2022

Here a video showing some interesting effects:

Vidura

Vidura posted this 26 December 2022

Thanks for the ideas and suggestions. Anyway I am convinced that Kapanadze, Ruslan, Shark used conventional Tesla resonators, Kacher-Brovin or nanopulser. All are these are different means to produce scalar waves. Therefore I will not deviate from the idea to proof or discard the proposed hypothesis.

Vidura

Aliengrey posted this 26 December 2022

Munny Hi ,

If it's of any interest your Master IVO video reminded me of the German guy, the Old  sciantist showed in one of his many video's a modified Tesla coil that set up as a wave guide wound difrently and ther is this  you tube video Поиск радианта Николы Тесла без мистики и фокусов. Стоячие волны.

They may be of some help

Sil

Munny posted this 24 December 2022

Have a look at Ivo's setup.  I helped him years ago get to this point and he's got stuff now worth incorporating into your project.

If you want to switch even faster there are components known as cascodes and they can be created using a MOSFET combined with a JFET.

Ivo much prefers pancake coils over cylindrical coils which you might want to consider.  They have their pros and cons like any other engineering solution.

bigmotherwhale posted this 24 December 2022

https://www.researchgate.net/profile/Naum-Gershenzon/publication/242468548/figure/fig9/AS:668624977141761@1536424025081/Square-pulses-of-width-l-a-unipolar-pulse-b-bipolar-pulse.pbm

you have to adjust the pulse width so it goes out of LC resonance by setting the pulse to the wavelenght, not up to 1/2 of the wavelength as is ushally done. 

This will result in a unipolar pulse. 

This of course would be my understanding as to whats going on in the BTG and may not be correct. 

Vidura posted this 24 December 2022

A short update. As the latest tests didn't result as expected, I went a step back and tried the transfer without the push-pull stage, and found the problem there. It seems that the earlier assumption of related wirelenght was correct, with the two actual receiving coils I couldn't get not nearly a good result as in the earlier experiments with wavelength relationship. So I will have to get more wire and rewind the coils to confirm that.

Vidura

Vidura posted this 24 December 2022

Replying To: Aliengrey

Any coil or peace of wire has its own resonant frequency, and will always vibrate in the same, or any harmonic of it. Regardless how it is excited it will vibrate according a sinusoidal law. If you hit a bell you can't expect wind coming out, only sound . The most similar output to a unidirectional pulse would be produced by a nanopulser, and even here we could expect the dampened wave from the coax cable, although in the 100mhz range for a short length of one meter approximately.

Vidura

Aliengrey posted this 24 December 2022

Yes unipolar pulse is a pulse going one way posative or negative but one and not the other as that would be a bipolar pulse,  my wave length is 1.5Mhz so to get another node at 3Mhz i have to retune my SG to that frequency and all i get is a sine wave and uless its got to be driven by a square wave I get nothing

Have you any idears ??

 

Sil

Close