The Don Smith Effect

  • 8.6K Views
  • Last Post 3 weeks ago
Fighter posted this 28 May 2023

In order to not interfere with Jagau's experiments with Dr. Stiffler's SEC technology which have many things in common with what Don Smith named "The Don Smith Effect" I'm starting in parallel with Jagau my own experiments with Don Smith's tech.

If this experiment is successful maybe we can unify the technologies these two great teachers demonstrated to us.

So below is my first post in this related thread here.

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Vidura posted this 3 weeks ago

Here anotherone, not copper but an interrresting design, for example from recicling a MOT transformer core:

https://hackaday.io/project/182504-diy-hv-variable-capacitor

Also the variable capacitors from old radioreceivers can be submerged in transformer oil, a good option,as this avoids streamers and dielectric leakage at high frequencies.

Vidura

Fighter posted this 3 weeks ago

Hello,

I just want to add a very importand conclusion here.

Remember I started this experiment trying to demonstrate that Dr. Stiffler's tech and Don Smith's tech are using the same common phenomenon.

Quote from my first post in this thread:

In order to not interfere with Jagau's experiments with Dr. Stiffler's SEC technology which have many things in common with what Don Smith named "The Don Smith Effect" I'm starting in parallel with Jagau my own experiments with Don Smith's tech.

If this experiment is successful maybe we can unify the technologies these two great teachers demonstrated to us.

As this experiment is successful I think I demonstrated the unification of these technologies.

The key to these devices and I think to all the overunity devices we're experimenting with here is the Heaviside component.

Let's take a look at what Don Smith told us:

It is found that creating a dipole and inserting capacitor plates at right angles to the current flow,
allows magnetic waves to change back into useful electrical (coulombs) energy. Magnetic waves passing through the capacitor plates do not degrade and the full impact of the available energy is accessed. One, or as many sets of capacitor plates as is desired, may be used. Each set makes an exact copy of the full force and effect of the energy present in the magnetic waves. The originating source is not depleted or degraded as is common in conventional transformers.

Now let's take a look at my DSE device:

And let's take a look at Jagau's SEC device:

What do they have in common ? The Heaviside component generated along a coil and interacting with the Zero-Point/Aether/Quantum field like a interface facilitating the interaction with the devices.

Quoting from the observation made by Jagau here during his experiments with his SEC device:

...the optimization of the coils gives me a better performance when the 3 coils are in spatial arrangement all at 90 degrees.


The device as in my first experiences as you saw works ok but has better performance with the coils in mutual inductance cancellation at 90 degrees. The best performance was achieved with the L3 coil standing upright on the board, L2 left to right and L1 front and rear plane.

And one quote from my post here:

That is the source of extra-energy for all our devices and that's how our devices go overunity.

That is the key to the technologies we're experimenting with. That's the big part which Heaviside removed from the original equations of Maxwell and the reason he did that was not for simplifying those equations.

The reason "they" did that was to remove any possibility for the "offcial" physics researchers to design and build overunity devices. Why ? It's simple, that was a threat for Big-Oil's profit of hundreds of trillions made in the last 100 years.

The Heaviside component is not used in any of our current technologies. More than that in all the energy/electronic designs it's simply ignored or even worse there are technical adjustments made to suppress it !

In my opinion this is the key to all our overunity devices we're experimenting with  (probably ZPM is also using it in its own way, see the Micro-Generator going crazy when I start the ZPM in the second video here).

This interface is manifesting itself inside and outside the coil which created it and is providing a medium for the Zero-Point/Aether/Quantum field to provide energy to our devices, more specific to plates or coils placed at right angle (90 degrees) on its direction.

As I shown in the experiments with my DSE device, the energy it provides is not "seen" by the input and is not affecting the input at all. Combined with the single-wire energy extraction using Avramenko plug (demonstrated by Jagau in his experiments) is the way of applying what Tom Bearden told us: "Don't kill the dipole !".

Well, in our experiments both me and Jagau demonstrated experimentally this mechanism of not affecting/killing the dipole while we're extracting the energy through the Heaviside component interface from the Zero-Point/Aether/Quantum field.

In my opinion this is the key of our journey to Rome.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Jagau posted this 3 weeks ago

Yes you are right Fighter,

it was Oliver Heaviside who discovered this vector flow of energy but unfortunately as Tom Bearden said, it was never taken into account by Poynting, and had been arbitrarily rejected by Lorentz. Unfortunately Lorentz's (the god of the time) abandonment of Heaviside's dark energy flow component has continued to be applied by electro-dynamicists today.

So we now know that it was Oliver Heaviside who was right so let's continue with his idea and finally move forward enough is enough.


Jagau

Close