Romanian ZPM (Zero Point Module) - Enhancements Stage

  • 23K Views
  • Last Post 10 August 2026
Fighter posted this 13 February 2023

This is the second imported thread (from the old aboveunity site) about my ZPM:

 

For references I will keep the original posting date for every imported post.

Note: This thread is public, everyone can see it, even the visitors which are not members here.

For the posts made by former aboveunity members which are not members on our site I'll use a member placeholder named UndisclosedMember.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Order By: Standard | Newest | Votes
Fighter posted this 13 February 2023

This is the second imported thread (from the old aboveunity site) about my ZPM:

 

For references I will keep the original posting date for every imported post.

Note: This thread is public, everyone can see it, even the visitors which are not members here.

For the posts made by former aboveunity members which are not members on our site I'll use a member placeholder named UndisclosedMember.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Fighter posted this 10 August 2026

Hello,

I'm adding here for later one of Joel Lagace's experiments I find interesting and related to ZPM:

https://www.youtube.com/watch?v=h9K0gE4E07M

I downloaded the video so we can have it on our server too:

Even if it's not an ZPM it has some things in common:

  • Metglass core (even if we also have a successful ZPM replication by Realco using a CRT ferrite core here);
  • Coils seems to have the same 1/3 turns ratio;
  • Works at it's specific resonant frequency which needs to be searched for (see ZPM's frequency-sweep);
  • At its specific resonant frequency the input goes down to a few milliamperes;
  • The "ringing" of the core after the input pulse is gone;
  • While powering its load the device is also sending power back to the DC source.

What's different:

  • The input coil is made of iron and only the output coil is made of copper;
  • The input and output coils are not connected together;
  • Not sure if the coils are producing opposing magnetic fields but I guess the LED placed on output which also acts like a diode could produce that.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
Fighter posted this 30 August 2025

Every experiment is interesting and a lot can be learned from both successful or failed experiments.

Plus in a thread you can receive advices or ideas and you can use it later as notes when you need details about them.

When you want to create your own thread feel free to do it.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
stranger posted this 30 August 2025

Thank you, I don't want own thread for now, may be later.

I don't see much point publishing unfinished or unsuccessful experiments.

... and my experience shows that most proabbly nobody will read it anyway šŸ˜€

Regards,

Stranger

 

  • Liked by
  • Fighter
  • Inception
Fighter posted this 30 August 2025

It's interesting, thank you for sharing.

Right now I'm working on the customized capacitor for my DSE experiment but I'll keep the info here to try when I'll return to ZPM experiments.

Yes, you're right, testing with a bigger core would me good and I would add using a Metglas core would be much better.

Even a small Metglas core (which should be cheaper), not necessarily AMCC-200.

If you want feel free to create your own thread in the Replications category to present your experiments.

It would be also useful for documenting your experiments for yourself, I always use this to find details about tests/experiments I did in the past else I wouldn't remember the details.

If you need help in creating the thread just let me know and I'll help.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
stranger posted this 30 August 2025

Hello Fighter,

Yes, I think that modulation will increase output.

I made some tests with small pot core.

Frequencies are very high and it difficult to come to some reliable conclusion.

Testing with a bigger core would be good.

I am attaching short overview what I have tried.

Regards,

Stranger

Attached Files

Fighter posted this 29 August 2025

Hi Stranger,

I moved your post here, I think it's a more appropriate place.

There is no shorted coil in ZPM, are you proposing a modification of ZPM ?

If yes, did you tested this or it's just theoretical ?

About asymmetry, remember it's embedded in ZPM: one coil have 150 turns and the other have 300 turns.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla
stranger posted this 28 August 2025

Hello,

I think you are missing one important thing in ZPM - second switch shorting one of the coils.

Here a file with some explanations.

Regards,

Stranger

PS Sorry if this is a wrong place for the file

 

Attached Files

AlteredUnity posted this 15 July 2025

Great to see you back at it. In a few of my videos or pics you see that is the exact filter I used, my scope test over load and then after filter, still more out than in. Though it didn't drop the current on PS as much so didn't think it was correct. But I too will set that back up to recheck.

Fighter posted this 07 July 2025

This is also a continuation from my post here, sorry for the delay, I intended to create this post yesterday but ran out of time.

Long time ago in the initial ZPM thread we had some discussions if there is something specific about my DC source making the ZPM working in tandem with its internal components and also if it's possible to block the high pulses sent back by ZPM to the DC source by using filters to make sure the readings of the DC source are not affected by those pulses.

I'm talking specifically about this post here.

In the meanwhile some of you guys replicated ZPM using different DC sources and, if I remember well, even a battery.

So the conclusion is there is not anything unique about my DC source. But I always wanted to also try my ZPMs with a different DC source to see if there are any differences.

A few months ago, before deciding to buy one cheap DC source but still switching-type like the one I use, I had a discussion with ChatGPT, I'm sharing the discussion here and just in case in the future I'll delete the discussion by mistake I'm gonna attach a PDF to this post containing the discussion.

You can check the discussion but the interesting part about my current DC source is this:

So for for giving a try of my ZPMs with another DC source I also bought this small switching DC source:

Also to try again to use a filter on the DC source (my previous attempt didn't worked as you can see in this post) I bought 3 pieces of these high-frequency filters:

As Vidura said in this post filtering everything sent back by ZPM to the DC source may not be possible:

Hey Friends, Recently I made some tests related to noise , and found that there is some kind of it which is virtually impossible to filter or screen out.

But I'll give it another try anyway.

I bought 3 pieces because these could be useful in the future on filtering noise going back to input in my other experiments.

I will add updates here as soon as I'll be able to continue this experiment.

Regards,

Fighter

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration."
Nikola Tesla

Attached Files

Jagau posted this 28 November 2023

There is a lot of work done by many here for the ZPM and also the way it was kindly shared by Fighter, which is a success and a good example to follow.

In the near future I will do it again with the new power analysis software on my MSO5354 which is integrated and does all the calculations in real time adequately. Something which is very difficult to calculate with only the standard math options for instantaneous power on an oscilloscope without making a mistake to get real power.

You will see the results are what was obtained in average power, this is real power,  taking into account the PF and cosphi, not just instantly like a scope without this option but in an average way.

ZPM is a must.

Jagau

What we consider to be empty space is merely a manifestation of unawakened matter. N.T.

Close